Cadmium Bearing Grades - Exporter, Importer & Manufacturer, Meerut, India

SARU SILVER ALLOY PRIVATE LIMITED

Cadmium Bearing Grades

Product Code : 01

[Select]

Product Specification

Saru Silver

Grade of
Brazing Alloy

Nominal Composition %

Melting
Range

International
Standards

Technical
Details

MSDS

Others

Â°C

DIN:8513

AWS:A5.8

SILVER 67Cd	67	11	12	10	-	635-720	L-Ag67Cd	-	To be provided
SILVER 67Cd	Used for brazing of silver goods made of silver alloys.								To be provided

SILVER 50Cd	50	15.5	16.5	18	-	620-640	L-Ag50Cd	BAg-1a	To be provided
SILVER 50Cd	One of the lowest melting point Silver Brazing alloys available. It has excellent flow characteristics. The highest joint strength can be obtained with this alloy. Has better resistance to corrosion in chlorine, sulphur and steam environments.								To be provided

SILVER 45Cd	45	15	16	24	-	605-620	L-Ag45Cd	BAg-1	To be provided
SILVER 45Cd	This has the lowest brazing temperature range of the BAg filler metals. It also flows more freely into narrow clearance capillary joints. Its narrow melting range is suitable for rapid or slow methods of heating.								To be provided

SILVER 44Cd	44	27	13	15	1P	595-660	-	-	To be provided
SILVER 44Cd	Low melting filler metal for brazing electrical contacts and molybdenum or copper-tungsten electrodes.								To be provided

SILVER 43Cd	43	16	20	21	-	615-620	-	-	To be provided
SILVER 43Cd	This has the shortest melting range of any silver brazing alloys. This alloy is regarded as the best brazing alloy by manu brazers. It is particularly recommended where a minimum brazing temperature is desirable to preserve the properties of the parent metals. Ideal where joints have a close fitup and will produce neat joints with optimum ductility and strength.								To be provided

SILVER 40Cd	40	19	21	20	-	595-630	L-Ag40Cd	-	To be provided
SILVER 40Cd									To be provided

SILVER 35Cd	35	26	21	18	-	610-700	L-Ag34Cd	BAg-2	To be provided
SILVER 35Cd	A free flowing general purpose brazing alloy. Its broader melting range is helpful where clearances are wide or are not uniform. Unless heating is rapid, care must be taken that the lower melting constituents do not separate out by liquation.								To be provided

SILVER 30Cd	30	28	21	21	-	600-690	L-Ag30Cd	BAg-2	To be provided
SILVER 30Cd	Similar to Silver 40Cd but more economical.								To be provided

SILVER 251Cd	25	30	27.5	17.5	-	605-680	-	BAg-33	To be provided
SILVER 251Cd	Silver 251, 250 & 20Cd have good fillet forming properties with an ability to bridge wide gaps. Their wide melting range limit their applications. Due to their wide melting range they are somewhat more subject to liquation and may require more care during brazing. Therefore, they are not normally recommended for applications with slow heating rates.								To be provided

SILVER 250Cd	25	35	26	14	-	605-745	-	BAg-27	To be provided
SILVER 250Cd									To be provided

SILVER 20Cd	20	40	25	15	-	605-765	L-Ag20Cd	-	To be provided
SILVER 20Cd									To be provided

SILVER 12Cd	12	50	31	7	-	620-825	L-Ag12Cd	-	To be provided
SILVER 12Cd	Economical alloy with wide melting range. Like above, preferred for applications having short heating cycles to avoid liquation. Ideal for bridging wider gaps where work pieces are insensitive to heat.								To be provided

SILVER 5Cd	5	-	-	7	-	335-392	-	-	To be provided
SILVER 5Cd	Used where alloy having higher melting point and better strength than soft solder is required.								To be provided

Other Products in 'High Silver Brazing Alloys' category

Cadmium Free Grades

		High Silver Brazing Alloys
		Copper Phosphorus Brazing Alloys
		Brass & Bronze Brazing Alloys

The membership of this company with Tradeindia has expired. To view other companies related to this industry, kindly Click Here